AVR Series
Single Phase (2-30 kVA)
Three Phase (6-1000kVA)

AVR Series 
Automatic Voltage Regulator
Single Phase (2-30 kVA),
Three Phase (6-1000kVA)
- Servo Motor Controlled Technology
- Fast Response for Fluctuations
- Reliable Stabilization for Secure Energy
- High efficiency in each model
- Short circuit protection
- Ability to work with non-linear loads
- Manual Bypass Switch
- Wide input voltage range version ( optional )
- Electro-mechanic (breaker module) high-low voltage protection ( optional )
- Output Isolation Transformer ( optional )
- Digital Display option available
- Higher IP applications are available
- Phase Independent Voltage Regulation for Three Phase Models

Inform AVR is used with any computer system, fax and photocopy machines, industrial, medical, laboratory, office appliances and household for secure energy.
Inform AVR protects your load from all fluctuations of the mains voltage and regulates it. It disconnects the output voltage electro-mechanically when an increase or decrease occurs that is out of limits and prevents all the possible problems by electronic protection ( optional ).
The booster transformer and sensitive variac do the voltage regulation. 
Servo system is based on the control of DC motor by thyristor.
Output voltage is observed by analogue or digital display ( optional ). Over current protection is ensured by magnetic switch and inside cooling is assured by natural cooling or fan depending on power. In single- phase models special inside structure and natural cooling is applied. Connections of the unit are done by NK model Terminals.

Phase protection, which is operated optionally, disconnects the output during low or high voltage value, and if there is no phase, again disconnects the output voltage by contactor. In order to avoid the possible problems that can be caused by sudden voltage fluctuations, Inform AVR includes a time relay, which can take the control in 2 seconds. It has a by-pass switch and on/off property.
Wide voltage range models may be produced upon request. The standard voltage range of these models may be altered upon request.
Digital Version enables monitoring of the following parameters; 
Input/Output Voltage, Output Current ( optional ), output frequency 
It also has Regulator in operation, output voltage high / low LED indicators 
Digital AVR provides output is present (Regulator in operation)  & Output voltage high / low dry contact alarm signals. 
Options(available for all power range)
Digital Display
Breaker Module (provides phase missing and low/high voltage protection)
Wide Voltage Range Model available