|
| |
|
 |
|
SVR SERIES
STATIC VOLTAGE REGULATOR
Single Phase 5-30 kVA ve Three Phase 15-90 kVA
Thyristor Controlled Technology
Microprocessor Controller
Wide Input Voltage Range
Reliable Output Voltage Stability
Overload Capability up to 130% Load
Electronic Control
Swift response to voltage fluctuations
High efficiency
Manual Bypass Switch
Operation Capability at high Temperature and Humidity
Short Circuit and Overload Protection
|
Static Voltage Regulator ( SVR ) is designed to protect your electrical equipment from voltage fluctuations of the mains.
The operating priciple of SVR is different from the classic automatic servo voltage regulator. Instead of a mechanical system causing the changes , the direct triggering of a fast thyristor is responsible for an accelerated response. SVR is composed of a transformer, semiconductor switch power unit which triggers this transformer, and microprocessor block which acts as an control and user interface.
SVR operation is based on coil selecting principle, which means supplying the consumer machine with auto transformer coils inside of it. It ensure machines (like motors, rectifier, and air conditioner) to operate properly and safely with selecting coil if a fluctuation and a deviation occur in the mains.
Furthermore the possibility of corrosion, calibration and maintenance requirements can be avoided.
The input voltage, output voltage ( if regulator is in operation ), output current, mains frequency can be observed from the display. Besides; the following information can be also obtained from SVR; Load on bypass or regulator, indication for availability of input for bypass, overload indication.
|
|
|
PRODUCTS
UPS
